16
ALC lens connector
1 3
2 4
2
Connect the lens cable to the ALC lens connector of the camera.
Pin No.
1
Dump
2
Dump
3
Drive
4
Drive
3
Connect the safety wire.
The following is an example of safety wire connection.
Important:
• Be sure to install the safety wire. Ask your dealer for installation.
For mounting on ceiling
q
Remove the tripod mount base on the top
of the camera.
w
Align the tripod mount base with the safety
wire plate for ceiling (accessory) and attach
them to the camera with the mounting
screws.
Important:
• Use the detached mounting screws to attach the tripod mount base. When using different
length screws, it may damage the camera or cause the camera to fall.
(Recommended tightening torque: 0.39 N·m)
Mounting screws
Tripod mount
base
Safety wire plate
for ceiling
(accessory)
Wire engaging hole
