29
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera image quality and the communication configuration
when a receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top
screen. Refer to page 5 for how to call up the screen.
Chroma level adjustment [CHROMA GAIN]
Use the right or left button to adjust the color density of the camera image. When the level indicator moves in the "+" direction,
the color becomes deeper, and when the level indicator moves in the "–" direction, the color becomes lighter. Be sure to view a
vector chromaticity indicator or a monitor when the adjustment is performed.
Aperture level adjustment [AP GAIN]
Use the right or left button to adjust the image quality. When the level indicator moves in the "+" direction, the image becomes
sharper, and when the level indicator moves in the "–" direction, the image becomes softer. Be sure to view a monitor when the
adjustment is performed.
Note:
• Moire (interference fringes) may be observed when shooting a subject with fine pattern such as a carpet or a curtain. In
such a case, move the indicator in the "-" direction to reduce moire.
Pedestal level adjustment [PEDESTAL]
Use the right or left button to adjust the pedestal level of the camera. When the level indicator moves in the "+" direction, the
image becomes brighter, and when the level indicator moves in the "–" direction, the image becomes darker. Be sure to view a
waveform monitor or a monitor when the adjustment is performed.
Note:
• Holding down the right and left buttons for more than 2 seconds simultaneously restores the settings of "CHROMA GAIN",
"AP GAIN", and "PEDESTAL" to the default settings.
**SPECIAL SETUP**
CHROMA GAIN ...
|
...128
AP GAIN ...
|
... 32
PEDESTAL ...
|
... 32
- +
PIX OFF
COMMUNICATION COAX
CAMERA RESET PUSH SW
SER.NO. XXXXXXXX
RET TOP END
