-31-
Fine Adjustment for AWC (ATW) Manually
You can add the detailed setting for white balance set-
ting manually.
1. To set MASK SET, proceed as described in steps
1 to 4 of “ALC mode with SUPER-D OFF and ELC
mode” on page 22.
2. Move the cursor to R.
3. Press
or
to obtain the optimum amount of
red gain.
4. Move the cursor to B.
5. Press
or
to obtain the optimum amount of
blue gain.
Note:
When you need to set MASK SET, re-adjust to
obtain the optimum amount of red and blue gain.
1. Move the cursor to the LENS DRIVE parameter.
2. Select DC if you are using the auto iris lens that
requires a DC drive signal.
Select VIDEO if you are using the auto iris lens that
requires a video drive signal.
7. Lens Drive Signal Selection (LENS
DRIVE)
This item is used to select the type of auto iris lens
drive signal to be supplied to the lens from the auto iris
lens connector.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER ---
AGC ON
SYNC INT
WHITE BAL ATW
LENS DRIVE DC
END SET UP ENABLE
↵
↵
↵
Summary of Contents for WV-CP450
Page 3: ......
