32
Step 1
Move the cursor to "AGC" and use right or left
button to select "ON" or "OFF".
ON (default):
Automatically increases the
gain to make the screen brighter when
the illuminance of the subject becomes
darker. The maximum value is adjust-
able.
OFF:
Does not increase the gain. (The nor-
mal image remains.)
Step 2
Move the cursor to "ON" and press the set-
ting button to call up the "AGC MAX" screen.
Step 3
Move the cursor to "LEVEL". The cursor is
reversely highlighted.
Move the cursor horizontally to adjust the
gain with use of the right or left button.
Notes:
• Change in the level of "AGC MAX" caus-
es change in the level of the input signal
that enables electronic sensitivity
enhancement when "SENS UP" is set to
AUTO and also change in the level of the
input signal that activates black-and-
white mode.
• If noise is undesirable, adjust the level of
"AGC MAX".
**CAMERA SETUP** 1/2
CAMERA ID OFF
O
ALC/ELC ALC
O
SHUTTER OFF
AGC ON
O
SENS UP OFF
SYNC INT
WHITE BAL ATW1
O
MOTION DET OFF
DNR HIGH
RESOLUTION HIGH
BW MODE
O
** AGC MAX **
LEVEL ···I···128
- +
RET TOP END
"CAMERA SETUP" screen
"AGC MAX" screen
4. Gain control setting [AGC]
