![background image](http://html.mh-extra.com/html/panasonic/wv-clr920a/wv-clr920a_operating-instructions-manual_277789038.webp)
-38-
The SC FINE adjustment has a range of 90 degrees
of colour shift.
Notes:
• When the “I” cursor reaches the “+” end, it
jumps back to “–”. At the same time, SC
COARSE is incremented by one step to enable
a continuous adjustment. The reverse takes
place when the “I” cursor reaches the “–” end.
• When
L
or
M
is kept pressed for a second
or more, the “I” cursor moves faster.
• For more accurate adjustment, supply both the
original camera video output signal and the
effect output video signal (program output
video signal) of the special effects generator
(SEG) to a vectorscope and compare the chro-
ma phase of both signals.
• To reset SC COARSE and SC FINE to the val-
ues preset at the factory, press
L
and
M
simultaneously.
6-3. VS Gen-lock Mode (EXT(VS))
1. Move the cursor to SYNC and select INT.
2. Connect the coaxial cable for the composite sync
or composite B/W video signal to the gen-lock input
connector.
3. Confirm that INT changed to EXT (VS) on the menu.
Caution:
The gen-lock input signal should meet the
CCIR specifications and should not contain jit-
ter, such as a VTR playback signal, as it could
disturb synchronization.
4. After confirming that the cursor is on EXT (VS),
press
I
. The phase adjustment menu appears
on the monitor.
5. Supply the video output signal of the camera to be
adjusted and the reference gen-lock input signal to
a dual-trace oscilloscope.
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
RET
↵
↵
↵
↵
↵
** CAM SET UP **
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON(DNR-H)
SENS UP OFF
SYNC EXT(VS)
WHITE BAL ATW1
MOTION DET OFF
LENS DRIVE DC
RET
↵
↵
↵
↵
** SYNC **
H PHASE ........I
- +
RET END