Panasonic WUME-SF4D-4, Instruction Manual

Page: 97 / 176

Adjustment
© Panasonic Industrial Devices SUNX Co., Ltd. 2017 97
● Emitter indicator operation 2 when error occurs
When the device detects an error, the control output (OSSD 1 / 2) turns OFF and a number
blinks or lights yellow in the digital indicator.
● When an error is detected in the emitter, the emitter enters the lockout state. Light emission
stops, and thus the control output (OSSD 1 / 2) turns OFF.
● When an error is detected in the receiver, the receiver enters the lockout state and the con-
trol output (OSSD 1 / 2) turns OFF.
<Conditions: Optical synchronization (frequency 1), Test input function invalid, Interlock function invalid>
Example: Series connection error ("2" blinks yellow)
Emitter
Light blocked state
Light received state
(all beam channels)
Error detected
in receiver
Top end beam channel
Light blocked Light received Light blocked Light received
Bottom end beam
Light blocked Light blocked Light received Light received
Other beam channels
Light received
/ Light blocked
Light received
/ Light blocked
Light received
/ Light blocked Light blocked
Control output
(OSSD 1 / 2)
OFF OFF OFF OFF OFF OFF
Upper application
indicator
Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF
Lower application
indicator
Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF
Stable light
reception indi-
cator (Note 1)
Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF
Digital indicator Yellow number
blinks or lights
Yellow number
blinks or lights
Yellow number
blinks or lights
Yellow number
blinks or lights
Yellow number
blinks or lights
Turns OFF
Frequency
indicator
Lights orange Lights orange Lights orange Lights orange Lights orange Lights orange
Light emission
intensity control
indicator (Note 2)
Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF
Test indicator Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF Turns OFF
Operation
indicator
Lights red Lights red Lights red Lights red Lights red Lights green
Notes: 1) The stable light reception indicator (green) does not light in the lockout state.
2) The light emission intensity control indicator (orange) lights orange when long mode is selected with the DIP switches.
3) For details on yellow blinking or lit numbers in the digital indicator, refer to “Chapter 5 Troubleshoot-
ing”
.