Panasonic WORKIO DP-C323 Operating Instructions Manual Download Page 209

Page: 209 / 220

209

Chapter 9 Solving Problems

407

No confirmation from the
receiving station for the previous
page sent.

Wait a few minutes and send again.

408/409

Remote side confirmation of
previous page is illegible.

Wait a few minutes and send again.

410

Communication aborted by the
transmitting side.

Check with the other party.

411

Polling password does not
match.

Check the polling password.

Operating
Instructions (For
Function
Parameters)

412

No data from the transmitting
side.

Check with the other party.

414

Polling password does not
match.

Check the polling password.

Operating
Instructions (For
Function
Parameters)

415

Polling transmission error.

Check the polling password.

Operating
Instructions (For
Function
Parameters)

416/417/418/

419

Received data has too many
errors.

Check with the other party.

420/421

Machine goes to receiving
mode, but receives no
command from the transmitting
side.

Remote side misdial.
Check with the other party.

422/427

Interface is incompatible.

Check with the other party.

430/434

Communication error occurred
while receiving.

Check with the other party.

436/490

Received data has too many
errors.

Check with the other party.

456

Unit received a confidential
document or was requested to
be polled of a confidential
document under any of following
conditions.

1.Not enough space in

memory to receive the
confidential document.

2.Confidential Mailbox is full.
3.While printing received

document.

Unit was requested to relay a
document.

Print a confidential document.
Wait until unit finishes printing.

Printing a
Received
Confidential
Document

(See

page 64)

492/493/494

Communication error occurred
while receiving.

Check with the other party.

Info. code

Problem

Action

Refer to

Summary of Contents for WORKIO DP-C323





























































































































































































































Search results

Summary of Contents for WORKIO DP-C323

Reviews:

Related manuals for WORKIO DP-C323

Brands by name

Popular brands

Panasonic WORKIO DP-C323, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-C323

Reviews:

Related manuals for WORKIO DP-C323

Brands by name

Popular brands