60
DP-2330/3030
DEC 2004
Ver.2.0
DP-2310/3010
J48
The Dual-Path Exit Sensor does not detect paper within a predetermined time after
the Fuser Unit Paper Exit Sensor is activated.
C
J51
The Paper Transport Unit Sensor 2 does not detect paper within a predetermined
time after eject paper Sensor of dual-path exit guide unit is activated.
B, C
J53
The Paper Transport Unit Sensor 4 does not detect paper within a predetermined
time after eject paper Sensor of dual-path exit guide unit is activated.
B, C
J56
The Paper Transport Unit Sensor 2 does not go off within a predetermined time.
B, C
J58
The Paper Transport Unit Sensor 4 does not go off within a predetermined time.
B, C
J59
The Paper Transport Unit Sensor detects paper during non-printing mode.
B
J60
The Finisher Registration Sensor is not detects paper within a predetermined time
after the Paper Transport Unit Sensor is activated.
A
J61
The stapler is not activated correctly.
A
J62
The Finisher Registration Sensor does not go off within a predetermined time after
the Sensor is activated.
A
J63
The Finisher Registration Sensor detects paper at the time of the initials.
A
J64
The Finisher Exit Sensor does not detect paper within a predetermined time after the
Fuser Registration Sensor is activated.
A
J65
The Finisher Exit Sensor keeps detecting paper after a predetermined time.
A
J66
The Finisher Exit Sensor keeps detecting paper at the time of the initials.
A
J80
The Automatic Duplex Unit Sensor 1 does not detect paper within a predetermined
time.
B
J82
The Automatic Duplex Unit Sensor 4 does not detect paper within a predetermined
time after Automatic Duplex Unit Sensor 1 is activated.
C
J83
The Automatic Duplex Unit Sensor 1 does not go off within a predetermined time after
the Sensor is activated.
C
J85
The Automatic Duplex Unit Sensor 4 does not go off within a predetermined time after
the Sensor is activated.
C
J87
The Automatic Duplex Unit Sensor 1 detects paper during non-printing mode.
C
J88
The Automatic Duplex Unit Sensor 2, 3 or 4 detects paper during non-printing mode.
C
J91
A Paper Tray is pulled out when feeding a paper.
C
J97
After passing the Registration Sensor (Roller), the Paper does not clear the sensor
within a predetermined time period.
C
J98
The VRDY Signal is not ON after a predetermined time has lapsed.
C
J99
No VSYNC Signal within a predetermined time after VRDY Signal is activated.
C
Jam Error Codes (J Code) Table
Code
Contents
Section
Summary of Contents for Workio DP-3010
Page 134: ...134 DP 2330 3030 DEC 2004 Ver 2 0 DP 2310 3010 memo ...
Page 311: ...311 DP 2330 3030 DEC 2004 Ver 2 0 DP 2310 3010 memo ...
Page 312: ...E ...