54
DP-2330/3030
DEC 2004
Ver.2.0
DP-2310/3010
3 Troubleshooting
3.1.
Error Codes (For Copier)
The self-diagnostic functions detect troubles in the important components of the copier.
When any trouble occurs, the copier stops.
3.1.1.
User Error Codes (U Code)
Note:
Uxx and a message will appear on the Panel Display.
User Error Codes (U Code) Table
Code
Item
Possible Cause(s)
U0
Key Counter
1. Card Key not installed.
2. Key Counter Harness disconnected.
3. Department Code not assigned.
U1
Close Front Cover
1. Front Cover open.
2. Front Cover Sensor disconnected.
3. Front Cover Sensor defective
4. LVPS connector disconnected.
5. LVPS defective.
6. SPC PCB connector disconnected.
7. SPC PCB defective.
U4
Close Finisher
1. Finisher open.
2. Paper in the output bin.
3. Stapler empty.
4. LVPS connector disconnected.
5. LVPS defective.
6. SPC PCB connector disconnected.
7. SPC PCB defective.
U6
Close Right Cover
1. Right Cover open.
2. Right Cover Sensor disconnected.
3. Right Cover Sensor defective.
4. LVPS connector disconnected.
5. LVPS defective.
6. SPC PCB connector disconnected.
7. SPC PCB defective.
U7
Close Feed Cover
1. Feed Cover open.
2. Feeder Unit incorrectly installed.
3. Feeder Unit connector disconnected.
4. Feeder Unit Sensor disconnected.
5. Feeder Unit Sensor defective.
6. LVPS connector disconnected.
7. LVPS defective.
8. CST2/CST3 PCB connector disconnected.
9. CST2/CST3 PCB defective.
U8
Close Paper Transport Unit
1. Paper Transport Unit open.
2. Paper Transport Unit Sensor disconnected.
3. LVPS connector disconnected.
4. LVPS defective.
5. SPC PCB connector disconnected.
6. SPC PCB defective.
U11
Remove Paper in Finisher
1. Paper in the Finisher.
2. Finisher Paper Exit Sensor defective.
Summary of Contents for Workio DP-3010
Page 134: ...134 DP 2330 3030 DEC 2004 Ver 2 0 DP 2310 3010 memo ...
Page 311: ...311 DP 2330 3030 DEC 2004 Ver 2 0 DP 2310 3010 memo ...
Page 312: ...E ...