Panasonic WORKIO DP-150FX Operating Instructions Manual Download Page 90

Page: 90 / 153

Document Manager

Title Bar

Displays the title of a screen.

Menu Bar

Displays the menu of the Document Manager.

Tool Bar

Displays the tool buttons of Document Manager. Tool buttons correspond to functions of the menus in
the menu bar.

Folder Window

Displays the folders containing the documents in tree form.

Link Icon

Dropping a dragged document onto a link icon, an application corresponding to the function of the icon is

activated.

Status Bar

Displays information such as the number of documents in a folder, the number of selected documents, and

file sizes, etc.

Document Window

Displays a list of documents in the selected folder.

Documents are displayed in thumbnails (reduced images). Page number and and buttons are

displayed at the bottom of a thumbnail image for grouped documents (configured with two or more pages).

Clicking the buttons turns the pages.

Summary of Contents for WORKIO DP-150FX


























































































































































Search results

Summary of Contents for WORKIO DP-150FX

Reviews:

Related manuals for WORKIO DP-150FX

Brands by name

Popular brands

Panasonic WORKIO DP-150FX, Operating Instructions Manual

Search results

Summary of Contents for WORKIO DP-150FX

Reviews:

Related manuals for WORKIO DP-150FX

Brands by name

Popular brands