Panasonic WJSX650 - SWITCHER Operating Instructions Manual Download

Page: 71 / 100

• ACTION

POWER:

The unit is powered on. (Highlighted: Power

off)

M01 to 32:

Alarm occurred to Monitor 1 to 32. (For

group sequence and group preset, the smallest
monitor number is displayed with "

∗

".)

C001 to C999:

Camera 001 to Camera 999 was activat-

ed for spot mode.

T01 to 32:

Tour Sequence 1 to 32 was activated.

G01 to 32:

Group sequence (or Group preset) 1 to 32

was activated.

Notes:

• User ID and Controller information is displayed for

an alarm reset or suspended by an operator. (They
are not displayed for auto reset.)

• User ID and controller No. will be highlighted to

indicate alarm reset or alarm suspension OFF.

• REC

"Recording Source (LCN)" associated with the alarm event
is displayed.

Refer to p. 74 Lists of Operations and Functions for opera-
tions while the Alarm History Display is displayed on the
monitor.

Summary of Contents for WJSX650 - SWITCHER





































































































Search results

Summary of Contents for WJSX650 - SWITCHER

Reviews:

Related manuals for WJSX650 - SWITCHER

Brands by name

Popular brands

Panasonic WJSX650 - SWITCHER, Operating Instructions Manual

Search results

Summary of Contents for WJSX650 - SWITCHER

Reviews:

Related manuals for WJSX650 - SWITCHER

Brands by name

Popular brands