30
■
Recorder Connection
The following is a connection example to use recorders.
* Refer to “Readme.txt” on the supplied CD-ROM for details on model numbers.
●
Connection to Video Output Connectors of Recorders
To display recorder images on monitors connected to this unit
When the video output connectors of recorders are connected to CAMERA IN connectors of this unit, recorder images can be
displayed on Monitor 1 to 32.
The following is the connection procedure.
1. Assign Unit Address (System) to the recorders. (Refer to p. 35
q
.)
Available unit addresses are 1 to 16. The unit address setting must be different from each other.
2. Decide the video input board to supply video input signals from recorder.
Choose a video input board that has more unused connectors (CAMERA IN 17 to 32) than the recorder total number.
Note:
Only one video input board can be connected to the video output connector of recorders.
3. Connect the video output connectors (the monitor output 2 connector) of recorders and the CAMERA IN 17 to 32 connec-
tors of the unit.
Recorder number
(Unit Address (System))
1
2
3
4
5
6
7
8
25
16
17
CAMERA IN connector of
video input board
32
9
24
31
10
23
30
11
22
29
12
21
28
13
20
27
14
19
26
15
18
Recorder number
(Unit Address (System))
CAMERA IN connector of
video input board
Note:
To supply video input signals from recorders to video input boards, perform the settings surely in RECORDER of SETUP
MENU (refer to p. 51) or "System" – "Recorder" of WJ-SX650 Series Administrator Console.
Summary of Contents for WJSX650 - SWITCHER
Page 99: ...99 ...