70
*
1
WV-CU950/650
*
2
WV-CU360C/CJ
Notes:
• Alarm all reset will also be conducted when setting
changes are performed in SETUP MENU or WJ-SX650
Series Administrator Console.
• To reset the alarms occurred to recorders, perform
alarm all reset. Alarm all reset is available even while no
alarms are occurring.
■
Return to Alarm Mode Status
You can recover from the ACK status to the alarm mode
status.
●
WV-CU950/650
Press the ACK button while holding down the SHIFT button.
The alarm mode will be recovered.
●
WV-CU360C/CJ
This operation is not available.
■
Alarm Suspension
You can suspend the system from accepting alarm input
signals when you do not want to be disturbed. (Alarm will
also be suspended for recorders.)
1. Press the ALM SUSPEND*
1
(or SUSPEND*
2
) button
while holding down the SHIFT button.
The alarm will be suspended.
2. To cancel the alarm suspension mode, press the ALM
SUSPEND*
1
(or SUSPEND*
2
) button while holding down
the SHIFT button again.
*
1
WV-CU950/650
*
2
WV-CU360C/CJ
■
Alarm History Display
The latest 1 000 alarm records (date, time and details) can
be displayed as the alarm history on an active monitor.
Note:
Alarm History Display is not available on monitors in
the alarm mode or during recorder selection.
●
WV-CU950/650
Press the ALM RECALL button. The Alarm History Display
will appear on the selected monitor.
●
WV-CU360C/CJ
Press the OSD and ALM H buttons at a time. The Alarm
History Display will appear on the selected monitor.
●
Details on Alarm History Display
"
∗
" beside the time indicates daylight saving time (sum-
mer time).
The following items are display details.
• ALARM (Highlighted for reset alarms)
T-001 to 256:
Terminal alarm
(Example: For T-001, "001" means the number of
alarm input signal accepted by the ALARM IN port
of video input board.)
C-001 to 999:
Camera alarm
(Example: For C-001, "001" means the number of
camera supplying an alarm input signal to the unit.)
R-001 to 999:
Recorder alarm
(Example: For R-001, "001" means the number of
camera associated with the recorder supplying an
alarm input signal to the unit.)
S-0001 to 1024:
Serial alarm
(Example: For S-0001, "0001" means the serial com-
mand alarm input number.)
V-001 to 999:
Video loss
(Example: For V-001, "001" means the number of
camera to which video loss has occurred)
ALL:
Alarm all reset
:
Alarm suspension ON/OFF
S
ALARM HISTORY 1 of 100
M D Y H M S ALARM ACTION REC
Aug31/06
∗
11:59:00PM ALL 12345 K4-8
Aug31/06
∗
11:58:00PM C-999 M32 C100 001
Aug31/06
∗
11:57:00PM V-001 M03 T32 256
Aug31/06
∗
11:56:00PM POWER
Apr15/05
∗
09:15:25AM POWER
Apr15/05
∗
09:15:25AM R-003
Apr15/05
∗
09:13:54AM S-0002 M10*G32 ———
Apr15/05
∗
09:12:32AM T-001 M20 ——— 999
Jan02/05 03:05:10PM S 56789 PC
Jan01/05 03:04:08PM S 101 PSD
T-TERMINAL C-CAMERA R-RECORDER
S-SERIAL V-VIDEO LOSS SSUSPEND
Summary of Contents for WJSX650 - SWITCHER
Page 99: ...99 ...
