manualshive.com logo in svg

Panasonic WJSX550C - MATRIX SWITCHER, Operating Instructions Manual

Share
Download
Panasonic WJSX550C - MATRIX SWITCHER Operating Instructions Manual Download Page 62

66

4

SETUP MENU

The Setup Menu provides a way for controlling functions
that are not available by a direct operation. Access to the
Setup Menu is limited to operators with the proper opera-
tor’s level.

●

Access to the Setup Menu

1. System Log-in

Refer to Log-in on page 97 for details.

2. Select the desired monitor for viewing the Setup Menu.

Refer to Monitor Selection on page 100.

3. Select the Set Up Menu 

(A6) 

on the LCD display by

pressing the Direction buttons (

A B D C

).

4. Press the Function 

F1

button to allow access to the

Setup Programming Menu (Set Up Menu).
The menu now appears on the active monitor.

Note:

The Setup Menu is initially set to the default val-

ues.
It can be programmed to limit access to certain
operator levels.
If the Setup Menu does not appear on the active
monitor and “PROHIBITED” appears on the LCD
display, press the 

MON (ESC)

key to return to the

previous Set Up Menu display.

The following buttons and keys are valid In the Setup
Menu:

Function buttons
F1:

Selects the next page.

F2:

Selects the previous page.

F3:

Deletes or initializes the setting where the cursor is
positioned.

F4:

Opens the Pop Up Window.

Executes the setting or selection.

Escapes from the programming mode or
menu.

Performs various functions, depending on
the selected menu

CAM

SET

MON

ESC

DEC

-1CAM

INC

+1CAM

●

Access to the Printer Menu:

1. Press the Direction (

C

) button to access the menu on

the LCD display as shown below.

2. Press the Function 

F1

button to open the Pop Up

Window, and then select the desired print out mode by
moving the Joystick Controller.
Press the 

CAM (SET)

key to start printing out the

selected setup data.
Press the 

MON (ESC)

key to stop printing.

To Clear all data from a table:

1. Press the Function 

F2

button to open the Pop Up

Window.
Select “Yes” by moving the Joystick Controller, and
then pressing the 

CAM (SET)

key to delete all data

from the selected programmed table.

F 1

F 2

F 3

F 4

Set Up Menu
Print Clear

F 1

F 2

F 3

F 4

Set Up Menu
 On

F 1

F 2

F 3

F 4

Set Up Menu
Next  Pre  Del PopUp

Summary of Contents for WJSX550C - MATRIX SWITCHER



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands