Panasonic WJMPU955A - CENTRAL PROCESSING UNIT, Operating Instructions Manual

Page: 65 / 87

65
To arm or disarm all alarms
Every time you press the ALARM/ALM SUSPEND but-
ton while holding down the SHIFT button, all alarms will
be armed or disarmed.
Note: To arm or disarm an alarm, activate Allow Disarm for
the alarm. (Refer to the Admin Console User's Guide
for details.)
■
To Operate Alarm-related
Camera (ACK)
You can operate the camera associated with the alarm
action as follows:
1. Perform Step 1 and 2 of Alarm Selection.
2. Enter a desired alarm action number by pressing the
numeric buttons.
Note: If you skip this step, Alarm Action #0 will be
specified.
3. Press the ACK button.
"Ack:nn" will appear on the LCD.
4. Control the cameras with the system controller.
(Refer to p. 58 Camera Site Accessories Control.)
Note:
To select another alarm, press the ALARM/ALM
SUSPEND button. The ACK status will be canceled
(cancelled). Then, enter the alarm action number
by pressing the numeric buttons, and press the
ALARM/ALM SUSPEND button again.
MON CAM
0123 ALL Arm 00512
MON CAM
0123 ALLDisarm 00512
MON 9 CAM
0123 Active 00512
MON Alarm00001 CAM
0123 Ack:9 00512
■
To Cancel Alarms
1. Perform Step 1 to 2 of p. 64 Alarm Selection.
2. Press the ALM RESET/ALM ALL RESET button to reset
the alarm. "Reset" will be displayed on the LCD.
Notes:
• To reset all the alarms at a time, press the ALM
RESET/ALM ALL RESET button while holding down
the SHIFT button.
• After the alarm is deactivated, "Armed" or "Cleared"
will be displayed on the LCD.
MON Alarm00001 CAM
0123 Reset 00512
MON Alarm00001 CAM
0123 ALL Reset 00512
MON Alarm00001 CAM
0123 Armed 00512
MON Alarm00001 CAM
0123 Cleared 00512