Panasonic WJMPU955A - CENTRAL PROCESSING UNIT, Operating Instructions Manual

Page: 68 / 87

68
• To display the spot playback picture, press the numer-
ic button corresponding to the desired channel num-
ber, then press the ENTER button. Then, the active
camera number will appear on the LCD.
• To select the next channel number, press the + button.
• To select the previous channel number, press the –
button.
●
Multiscreen Segment Switching
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the MULTI SCREEN button. Every time you press
the button, the multiscreen segment patterns are
switched.
4 segments (1 - 4 CH)
→
4 segments (5 - 8 CH)
→
4
segments (9 - 12 CH)
→
4 segments (13 - 16 CH)
→
7
segments (1 - 7 CH)
→
9 segments (1 - 9 CH)
→
9 seg-
ments (10 -16 CH)
→
10 segments (1 - 10 CH)
→
13
segments (1 - 13 CH)
→
16 segments (1 - 16 CH)
3. To return to the spot display, press the numeric button
corresponding to the desired channel number. Then,
press the ENTER button, or press the CAM (SET) but-
ton while holding down the SHIFT button.
●
Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a
camera's optical zooming.
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note: If you have performed Recorder Auto Selection
in p. 67, skip this step.
3. Select the desired channel number by pressing the
numeric buttons.
4. Press the ENTER button.
The selected channel 's picture is displayed in the spot
mode.
5. Each time the EL-ZOOM button are pressed, the zoom-
ing range are changeable as follows:
2x
→
4x
→
1x
→
2x …
Note: You can move the zoomed area on the monitor
by moving the 3D joystick.
●
A-B Repeat Playback
Refer to p. 76 A - B Repeat Playback.
●
Playing the Latest Recorded Image
1. Select the recorder. (Refer to p. 67 Recorder Selection.)
2. Press the PLAY/PAUSE button.
To start the playback, press the PLAY/PAUSE button.
The recorded image will be played back.
Note: If you have performed Recorder Auto Selection
in p. 67, skip this step.
3. Press the GO TO LAST button during the playback. The
latest recorded image will be played back.
MON DVR
0123 Unit:01 >00512