Panasonic WJMPU955A - CENTRAL PROCESSING UNIT, Operating Instructions Manual

Page: 32 / 87

32
Decoder #
■
Digital Video Decoder Devices
Digital video decoder devices refer to MPEG2 video decoder devices (WJ-GXD900). They connect to the CPU through an
Ethernet switching hub in an IP based network. Refer to the Operating Instructions of MPEG2 encoder/MPEG2 decoder.
●
Connect with CPU
The video decoders connect with the CPU through its Ethernet port and one or more switching hub units. The system can sup-
port up to 64 video decoder devices.
●
Setup from Admin Console
In order to be added to the GX System, a decoder device must be entered into the digital device database. In the admin con-
sole, select Switch Nodes from the Domain menu, select Digital (GX) from the sub-menu that appears, and then enter the infor-
mation for the decoder device. Please note, you need to know the Rotary Switch (SW1 A, B, C) readings from the decoder
device. Rotary Switch settings must be unique for all the encoder and decoder devices. efer to the Operating Instructions of
MPEG2 encoder/MPEG2 decoder.
●
Setup Decoder Itself
In order to communicate with the CPU, the decoder device must also be configured. You can access the decoder device
through its Web interface using Microsoft Internet Explorer. Following is an example of the system layout and information to be
filled into the table.
SIGNAL GND
POWER
ON
OFF
3
3
1
4
2
1
4
2
VIDEO OUT AUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ – G
QUAD
10BASE-T/100BASE-TX SERIAL
2 1 OTHER SYSTEM
DEVICE
SYSTEM
CONTROLLER
POWER
ON
AC IN
OFF
SIGNAL GND
WJ-GXD900
WJ-MPU955A
Switching HUB
10BASE-T/100BASE-TX SERIAL
2 1 OTHER SYSTEM
DEVICE
SYSTEM
CONTROLLER
POWER
ON
AC IN
OFF
SIGNAL GND
POWER
ON OFF
SIGNAL AUDIO IN VIDEO OUT VIDEO IN
100BASE-TX RS-485 TERM
1
GND
2 3
ON OFF
4
ALARM IN TRIGGER OUT RESET
4 3 2 1 G 4 3 2 1 GG V + – G
POWER
ON OFF
SIGNAL AUDIO IN VIDEO OUT VIDEO IN
100BASE-TX RS-485 TERM
1
GND
2 3
ON OFF
4
ALARM IN TRIGGER OUT RESET
4 3 2 1 G 4 3 2 1 GG V + – G
POWER
ON OFF
SIGNAL AUDIO IN VIDEO OUT VIDEO IN
100BASE-TX RS-485 TERM
1
GND
2 3
ON OFF
4
ALARM IN TRIGGER OUT RESET
4 3 2 1 G 4 3 2 1 GG V + – G
POWER
ON OFF
SIGNAL AUDIO IN VIDEO OUT VIDEO IN
100BASE-TX RS-485 TERM
1
GND
2 3
ON OFF
4
ALARM IN TRIGGER OUT RESET
4 3 2 1 G 4 3 2 1 GG V + – G
192.168.1.10
192.168.3.11
192.168.4.11
192.168.1.11
192.168.4.1 192.168.3.1 192.168.1.1
192.168.2.1 192.168.200.1
SIGNAL GND
POWER
ON
OFF
3
3
1
4
2
1
4
2
VIDEO OUT AUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ – G
QUAD
SIGNAL GND
POWER
ON
OFF
3
3
1
4
2
1
4
2
VIDEO OUT AUDIO OUT
MIX
RESET
1000BASE-T
100BASE-TX
V+ – G
QUAD
192.168.200.200
192.168.2.10
192.168.2.11
Switching HUB
WJ-GXD900
WJ-GXE900
WJ-GXE900
WJ-GXE900
WJ-GXE900
WJ-GXD900
WJ-MPU955A
Switching HUB
L3SW
1
2
Operation Mode
Main CPU mode
Main CPU mode
IP Address
192.168.3.11
192.168.4.11
Subnet Mask
255.255.255.0
255.255.255.0
Default Gateway
192.168.3.1
192.168.4.1
DNS
0.0.0.0
0.0.0.0
Rotary
Switch
1-0-0
1-0-1