![Panasonic WJMPU955 - PROCESSING UNIT - TMU Operating Instructions Manual Download Page 20](http://html1.mh-extra.com/html/panasonic/wjmpu955-processing-unit-tmu/wjmpu955-processing-unit-tmu_operating-instructions-manual_3851644020.webp)
20
Procs section
This section tells the system which interface is to be used by certain process files.
[PROCS]
***{ Process Interface Assignments
}
***{ Format: <Process Name>=<interface_num>
}
***{ Set these three to the interface_num of the Ethernet keyboards:
}
Keybp=1
Mxconts=1
Mxpfw=1
“1” means interface1 in [INTERFACES] section. MPU955 CPU has 3 software processes (listed above) to communi-
cate to a CU850. All processes should use same interface number. Factory default setup is interface “1”.
***{ Set Swcpu to the same interface_num for all unit CPUs:
}
Swcpu=1
“1” measn interface1 in [INTERFACES] section. In case of redundant system, Both CPUA and CPUB must be
assigned the same interface_num. Factory default setup is interface “1”.
***{ Set UnitManager to the same interface_num for all system CPUs: }
UnitManager=2
Not currently supported
***{ Set CSntp to the interface_num for EXTERNAL SNTP operation:
}
CSntp=2
Not currently supported
***{ Set SSntp to the same interface_num for all system CPUs:
}
SSntp=2
Not currently supported
***{ Set SNMPAgent to the same interface_num for all system CPUs: }
SNMPAgent=2
“1” means interface1 in [INTERFACES] section. Factory default setup is interface “2”.
OSD section
All settings in this section are set to factory default, which provide the best monitor layout.
[OSD]
***{ Initial OSD display position
}
***{ Alarm text is placed on the General Status line.
}
***{ Format: <DisplayItemPosition>=<x-position>,<y-position> }
TimeDatePosition=1,1
CamTitlePosition=1,16
MonStatusPosition=1,15
GenStatusPosition=1,14
***{ Time-Date, Camera Title and Camera ID Controls }
***{ Code 2 takes effect only if source is MXOSD
}
***{ Format: <Control Name>=<control code>
}
***{ control code 0 - OFF
}
***{ control code 1 - ON
}
***{ control code 2 - By Operator
}
TimeDateControl=2
CamTitleControl=2
CamIDControl=2
***{ Time and Date display format
}
***{ Format: TimeDateFormat=<format> }
***{ format 0 - DD/MM/YYYY
}
***{ format 1 - MM/DD/YYYY
}
***{ format 2 - DD/Mmm/YYYY
}
***{ format 3 - YYYY/MM/DD
}
***{ format 4 - Mmm/DD/YYYY
}
***{ format 5 - DD/MM/'YY
}
***{ format 6 - MM/DD/'YY
}
***{ format 7 - DD/Mmm/'YY
}
***{ format 8 - 'YY/MM/DD
}
***{ format 9 - Mmm/DD/'YY
}
Summary of Contents for WJMPU955 - PROCESSING UNIT - TMU
