background image

Specifications

Required Power:

AC 120 V, 60 Hz

Power Consumption:

max. 55 W (with 2 HDD units installed)

Interface:

SCSI-2 (Fast SCSI), Half-pitch 50-pin D-sub

Operating Temperature:

+5˚C to +45˚C (41˚F to 113˚C)

Dimensions:

420 mm (W) x 88 mm (H) x 350 mm (D), (exclusive of rubber feet)
16-9/16” x 3-7/16” x 13-13/16”

Weight

approx. 7.7 k

g

(17 lbs)

Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.

NM0501-3101

V8QA5725DN

Printed in Japan

N

19

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010

Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.

Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985 (809)750-4300

Panasonic Security and Digital Imaging Systems Company
A Division of Matsushita Electric Corporation of America

Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094
Regional Offices:
Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303
Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838
Midwest:

1707 North Randall Road, Elgin, IL 60123 (847) 468-5211

Western:

6550 Katella Ave., Cypress, CA 90630 (714) 373-7840

2001

© Matsushita Communication Industrial Co., Ltd.  All rights reserved.

Accessories

Power Cord ............................................................1 pc.
DVD Viewer Software (CD-ROM) ..........................1 pc.
SCSI Cables (Half-pitch 50-pin D-sub) .................2 pcs.
Rack Mounting Brackets .......................................2 pcs.
Bracket Fixing Screws ...........................................4 pcs.

HDD Fixing Screws................................................8 pcs.
Absorbers ..............................................................8 pcs.
Sleeves ..................................................................8 pcs.
Earth Lugs .............................................................2 pcs.
Eject Pin .................................................................1 pc.

Phenomenon

Cause

Dirt or dust DVD-RAM disc [Recording
reserve area (shifting area) is used 90 %
or more.] In case of this, it changes into
write disable mode automatically.

Use DVD-RAM disk only for reading.

Dirt or dust of the optical lens or DVD-
RAM disc
In case of this, it changes into write dis-
able mode automatically.

Use the optional cleaning disc, In
case of being formatted DVD-RAM
disk, it may use. We recommend
backing up the recorded data.

Use the optional cleaning disc.

The internal temperature of the WJ-
HDE510 is too high.

After removing the obstacle blocking
ventilation openings or fan, turn the
power of the WJ-HDE510 off.

What to do

When the DVD-RAM drive detects error, Busy indicator blinks in green.

Blinking 3 times

0.2 sec.

1.0 sec.

0.2 sec.

Blinking 2 times

0.2 sec.

1.0 sec.

0.2 sec.

Blinking 1 time

1.0 sec.

0.2 sec.

Summary of Contents for WJHDE510 - EXTENTION BOARD













Reviews: