39
Standard Accessories
CD-ROM* ............................................................................................................ 1 pc.
Installation Guide (this manual) ............................................................................ 1 pc.
The following are for installation:
Power Cord (NTSC model) ................................................................................ 1 pc.
Power Cord (PAL model) ................................................................................. 2 pcs.
Rack Mounting Bracket ................................................................................... 2 pcs.
Screw for Rack Mounting Bracket ................................................................... 4 pcs.
Hard Disk Drive Fixing Screw (w/sleeve and damper). ................................. 12 pcs.
* The CD-ROM contains the operating instructions (PDFs) and the setup tools (Panasonic IP setup software, etc.).
High-speed serial interface, 480 Mbps (theoretical value), x1
General
Specification
Power source
Power consumption
Ambient operating
temperature
Ambient operating
humidity
Maximum operating
altitude
Dimensions
Weight
Input/Output
External storage
Alarm/Control
connector
Alarm connector
NTSC model: 120 V AC, 60 Hz
PAL model:
220 V - 240 V AC, 50 Hz
85 W
5 °C to 45 °C {41 °F - 113 °F}
5 % - 90 % (non condensing)
2 000 m (6 562 feet) above sea level
420 mm (W) x 88 mm (H) x 350 mm (D) {16-9/16" (W) x 3-7/16" (H) x
13-3/4" (D)} (excluding rubber feet and projections)
8.3 k
g
{18.3 lbs.}
Emergency recording input *
1
, Alarm output for available disk space of
the copy/event recording area*
2
, HDD error output*
2
, Camera error out-
put*
2
, Error output*
2
, Power outage recovery completion output*
1
, Time
adjustment input/output*
4
, Power outage detection input*
1
, External
recording mode switching*
1
, Alarm output 8-16*
2
, Alarm suspension
input*
1
, Alarm reset input*
1
, Network error output*
2
, +5 V output*
5
(D-sub 25-pin)
Alarm input 1-16*
1
, Alarm output 1-7*
2
(D-sub 25-pin)
Camera port/client
PC port
Maintenance port
10Base-T/100Base-TX (RJ-45)
10Base-T (RJ-45)
*
1
: Non-voltage make contact, +5 V pull-up 150 k
Ω
*
2
: Open collector output, 24 V DC max., 100 mA
*
3
: HIGH (+5 V - +12 V, 6.3 mA max.)
*
4
: 52 k
Ω
, 5 V pull-up, Output current –100 mA/Non-voltage make contact input
*
5
: 200 mA max.
