W
J
-H
D
3
0
0
A
D
V
R
S
E
R
IE
S
G
U
ID
E
Creating [REC Program] and [Event Program]...continued
Step 7
: For CAM3, CAM4 and CAM5, use arrow buttons
(
ʆʈʉʇ
)
to go
to SCHEDULE and set the values:
x
RATE = 10 ips
x
QUALITY = SFB
(Be sure to disable/turn off camera inputs that are not
required to be recorded. )
Step 8
: Select submenu EVENT PROGRAM from
Schedule Main Menu. Go to EVENT PROGRAM 1.
Press [SET].
28
W
J
-H
D
3
0
0
A
D
V
R
S
E
R
IE
S
G
U
ID
E
Creating [REC Program] and [Event Program]...continued
Step 9
: Select VMD Setup submenu. Use Jog Dial to set Operation
mode to ACT DET (Activity Detection Mode). Use arrow
buttons (
ŸźŻŹ
) to move the cursor to OK and press
[SET].
Step 10
: Use [SETUP/ESC] to go to EVENT on Main Menu.
Select VMD Setup Sub Menu. Press [SET]. Select ON for
CAM 1. Press [SET].
Step 11
: Rotate Jog Dial until SETUP AREA is displayed in
the status area. Use arrow buttons (
ŸźŻŹ
) to move
cross (+) cursor to desired ‘starting point’. Press [SET]. Use
arrow buttons to select area ‘ending point’.
Step 12
: Choose two opposite areas on the screen to
capture the image from the opposite sides of the point of
interest. Press [SET].
29
