background image

26

Select menus and determine settings according to the system 

available in the household. All initial settings must be done by an 

authorised dealer or a specialist. It is recommended that all alterations 

of the initial settings are also done by an authorised dealer or a 

specialist.

• 

After initial installation, you may manually adjust the settings.

• 

The initial setting remains active until the user changes it.

• 

The Remote Controller can be used for multiple installations.

• 

Ensure the operation indicator is OFF before setting.

• 

The system may not work properly if set wrongly.
Please consult an authorised dealer.

To display <Main Menu>: 
To select menu: 

 

 

 

To con

fi

 rm the selected content: 

Menu

Default Setting

Setting Options / Display 

1 Function 

setup

1.1

 Weekly timer

Once the weekly timer is set up, 

User can edit from Quick Menu.

To set up to 6 patterns of 

operation on a daily basis.

• 

Disabled if Heat-Cool SW is 

select “Yes” or if Force Heater 

is on.

Timer setup

Select day of the week and 

set the patterns needed

(Time / Operation ON/OFF / Mode)

Timer copy

Select day of the week

1.2

 Holiday timer

To save energy, a holiday 

period may be set to either turn 

OFF the system or lower the 

temperature during the period.

OFF

   ON

Holiday start and end.

Date and time

Select

Confirm

10:34am,Mon

Holiday: End

/ 01  /  01

Year/Month/Day

Hour : Min

10 : 00  am

2022

OFF or lowered temperature

• 

Weekly timer setting may be temporarily disabled during Holiday timer setting 

but it will be restored once the Holiday timer is completed.

1.3

 Quiet timer

To operate quietly during the 

preset period.

6 patterns may be set.

Level 0 means the mode is off.

Time to start Quiet :

Date and time

Level of quietness:

0 ~ 3

Menus 

For user

Summary of Contents for WH-SDC12K6E5

























































Reviews: