background image

Panasonic Aquarea heat pump

In this manual, you will fi nd useful information that will allow you to operate 
your Panasonic Aquarea system to provide heating & hot water in the most 
effi cient and cost effective way.

Overview of System 
The centre of your system is the market leading high performance “Panasonic 
Aquarea” air source heat pump. This heat pump can provide all your heating 
and hot water, heating will be delivered using underfl oor, traditional radiators 
or fan assisted radiators, Hot water will be supplied from a cylinder, Delivery 
of heat is usually controlled by the Panasonic controller, which will 
automatically operate your heat pump when heating is required during the 
heating season and hot water all year round. Room heating control will be 
from room wall mounted thermostats or on the radiators (TRV’s).

Bi-Bloc option

New All in One option

1b

1c

3

1a

2

Heating control App for smartphone, tablet or computer (Optional)
The heating control App allows you to control the heating and hot water system via your 
smart phone, tablet or computer with ease, whether at home or away. The heat pump can 
be also connected to house management system using KNX, Modbus or Zig Bee interfaces.

2

Aquarea Air. High efficient radiators for heating and cooling (Optional)
·  High efficient radiators working with water at 35°C.
·  No need for two kits if both floor heating and radiators are required.
·  As the product is efficient, it opens the possibility to also provide cooling while still meeting 

construction requirements.

Panasonic offers a cooling mode within its heat pump range for low consumption homes.

3

Water tanks (Optional)
·  High efficient tank solution: specially designed to improve the efficiency of the domestic 

hot water production .

· Low energy losses
·  High exchange surface for high efficiency and short time to heat up the water.
· 180, 200, 300, & 400 L versions
· WH-TD20E3E5-UK / WH-TD30E3E5-UK
· PAW-TE18C2E3HI-UK / PAW-TE18C2E3STD-UK
· PAW-TE30C2E3STD-UK / PAW-TE40C2E3STD-UK

4

2. Overview of ASHP system supplied

Aquarea air to water heat pumps
Panasonic has developed an extensive range of air-to-water heat pumps designed to 
efficiently convert free air into sustainable heating and hot water. Fitted externally to your 
home and designed to operate in all year round weather conditions (-20 ºC), it’s the smart 
efficient alternative to oil, gas and electric heating systems. 

1a

1b

1c

4

USER GUIDE 

3

UK_MANUAL_B.indd   3

29/07/15   12:17

Summary of Contents for WH-ADC Series













Reviews: