Panasonic VT60 series, Ehelp

Page: 56 / 239

Watching TV
3D
Registration
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
1. Turn the TV on
2.
Press power button for about 1 second to turn the power on.
The lamp lights for about 2 seconds and then flashes.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 1.6 ft (50 cm) from the TV while
registration in progress.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
Registration again
When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
1.
Turn the TV on
2. Within 1.6 ft (50 cm) from the TV, press Power button until lamp
lights, then release it to start registration.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1.
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
First registration First registration
1. Turn the TV on
2.
Press power button for about 1 second to turn the power on.
The lamp lights for about 2 seconds and then flashes.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 1.6 ft (50 cm) from the TV while
registration in progress.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
1. Turn the TV on 1. Turn the TV on
2.
Press power button for about 1 second to turn the power on.
The lamp lights for about 2 seconds and then flashes.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 1.6 ft (50 cm) from the TV while
registration in progress.
2.
Press power button for about 1 second to turn the power on.
The lamp lights for about 2 seconds and then flashes.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
Registration again
When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
Registration again
When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
Registration again Registration again
1.
Turn the TV on
2. Within 1.6 ft (50 cm) from the TV, press Power button until lamp
lights, then release it to start registration.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
1.
Turn the TV on
1.
Turn the TV on
2. Within 1.6 ft (50 cm) from the TV, press Power button until lamp
lights, then release it to start registration.
2. Within 1.6 ft (50 cm) from the TV, press Power button until lamp
lights, then release it to start registration.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
3. When the registration is successfully completed, the 3D Eyewear
will reconnect with TV automatically when 3D Eyewear is turned
on near the TV in 3D mode.
If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1. If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1. If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1.
56 (0100806)