Installation position of the door
station and camera range
Refer to the following examples and confirm the
area viewable by the camera. In each illustration,
the viewable area is indicated by "
A
" and the
centre of the camera lens is indicated by "
B
".
Installed on vertical wall, side view
Camera height: 1450 mm
1450 mm
1830 mm
69°
690 mm
A
1140 mm
500 mm
B
Top view
500 mm
113°
1510 mm
A
Note:
R
The measurements and angles shown here are
for reference purposes and may vary depending
on the environment.
R
Install the door station so that the door station is
not exposed to strong light. If strong light shines
on the door station, the visitor’s face may not be
distinguishable.
Installation
Important:
R
When existing wiring (such as chime wires) is
used:
– It may contain AC voltage that may cause
electric shock and/or damage the product.
– Never use the following types of wiring.
Consult a qualified technician/dealer.
R
See “Wire and cable specifications”, Page 17
for information about wiring materials.
1
Remove the screw, and then remove the
mounting base.
A
B
A
Screw
B
Mounting base
2
Attach the mounting base to the wall securely
using the mounting screws.
R
After securing the mounting base to the
wall, caulk the top and sides of the
mounting base with water-resistant sealant.
Do not caulk the bottom side.
13
Installation
