A
A
E
D
71.5 mm
56 mm
B
C
A
Mounting base
B
LAN cable
C
DC cable from power supply unit
D
Area caulked with water-resistant sealant
E
Area not to be caulked
3
Connect the wires and cables to the door
station.
R
See “Connecting the wires and cables”,
Page 14.
4
Attach the door station to the mounting base,
and then secure the door station to the
mounting base using the screw.
Connecting the wires and cables
1
Connect the LAN cable to the LAN connector.
2
Optional
If you are using a power supply unit to power
the door station, connect the DC plug to the
DC IN connector.
R
See “Installing the power supply unit (sold
separately)”, Page 10 for information about
installing the power supply unit.
3
Optional
If you are using a relay box to connect an
electric lock to the door station, insert the
wires from the relay box into the 2-pin terminal
block, tighten the terminal block screws, and
then attach the 2-pin terminal block to
connection terminals R1 and R2.
R
Make sure the wires are inserted fully into
the terminal block and that the terminal
block screws are tight enough to prevent
the wires from pulling out.
R
Make sure the 2-pin terminal block snaps
into place and is securely connected to
connection terminals R1 and R2.
R
See “Installing the relay box (sold
separately)”, Page 15 for information
about installing the relay box.
A
C
D
B
A
LAN cable
B
DC plug from power supply unit
C
2-pin terminal block
D
Wires from relay box
14
Installation
