Panasonic VL-SWD275, Instruction Manual

Page: 3 / 16

product may cause such devices to
malfunction, resulting in an accident.
CAUTION
Preventing electric shock
R If the wiring is underground, do not
make any connections underground.
R If the wiring is underground, use a
protection tube.
R If the wiring is outdoors, use a
protection tube or a surge protector.
Preventing injury
R Install the product securely adhering
to the instructions in this guide to
prevent it from falling off the wall.
Avoid installing onto low-strength
walls, such as gypsum board, ALC
(autoclaved lightweight concrete),
concrete block, or veneer (less than
18 mm thick) walls.
R To prevent serious injuries due to the
product unexpectedly falling, the
product with a wall mount feature
must be installed at a height of 2 m or
lower.
Supplied accessories for installation
For the doorphone *1
Mounting base
´
1
Screw
´
2
(3.8 mm
´
20 mm)
Screw
´
4
(4 mm
´
12 mm)
For the main monitor/extension monitor
Screw
´
2
(4 mm
´
16 mm)
Mounting bracket
´
1
Power supply unit and related items
*2
Cable binder
´
1
Power supply unit
´
1
(VL-PS241)
AC cable
´
1 Screw
´
2
(4 mm
´
40 mm)
Important:
R You will need the following additional items to install and configure the doorphone and the
main monitor/extension monitor.
[Locally procured]
– DC cable *2 and wires (for doorphone and other connections):
Prepare a cable and wires of the appropriate specification. ( a "Wire type and length")
3