Installation
15
Wall-mounting
You can mount the repeater on the wall with the included wood screws and washers.
Mount the repeater on a wall (pillar) where the wood screws can be firmly fixed.
1
Drive the wood screws with washers into the wall (pillar).
Approx.
60 mm
2
Mount onto the wall, directing the wood screws into the slots on the repeater, and slide
the repeater down until it is secure.
L�
About 140 mm of space above the washers is required for raising the antenna.
Approx. 140 mm
2.5 – 3 mm
Wood screw
(included)
Wall
(Pillar)
Washer
(included)
Important:
L�
Do not mount the repeater on walls made of plasterboard, ALC (Autoclaved Lightweight
aerated Concrete panel), concrete block, or plywood of 18 mm or less in thickness.
Approx. 60 mm
W
all mount template
VL-FAN1BX_0329.indd 15
2006/03/29 20:23:46
