TV
24
Note
•
You cannot record the copy protected signals.
•
If the Off timer function is activated or press the Standby On / Off button on the
remote control during recording, the recording will not stop.
•
Do not press the MAINS power On / Off switch on the TV during recording.
Otherwise the fi le will be broken.
•
Do not remove the SD card while recording. The data being recorded and
other data stored on the SD card may become unreadable.
•
SD recording may not be fully compatible or playable in some PC software or
PDA devices.
•
When two pictures are shown on the same screen as Multi window functions,
the main window is the one that is recorded. The picture can be switched for
the sub window (p. 11).
•
If the signal system is changed during recording, it cannot be recorded
completely.
•
The signals without video (only audio) cannot be recorded completely.
•
For details (p. 35 and p. 38)
Recording a Programme on SD Card
While watching a programme
2
To stop
3
(During the confi rmation message appears)
The TV channels and AV1 input signals (PAL / SECAM) can be recorded on the SD card. During
recording, it is possible to watch other terminals input signal.
•
Recordable time is displayed if the
recording time is not set. (p. 25)
•
Start recording
•
Cancel
Start recording?
Not enough memory
Current setting
Rec
time
180min
Rec
mode
Economy
Recordable
at
15min
Card capacity is not enough.
•
Continue
(
Recording is stopped when
the card capacity is full.)
•
Cancel
Ŷ
Should such a message appear
Insert the SD Card
(p. 23)
1
This product is licensed under the MPEG-4 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”)
and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a licensed video provider. No license is granted or implied
for any other use. Additional information may be obtained from MPEG LA. See http://www.mpegla.com.
