4
G
7
Connections
Ɣ
External equipment and cables shown are not supplied with this TV.
Ɣ
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Ɣ
Check the type of terminals and cable plugs are correct when connecting.
Ɣ
Always use a fully wired HDMI cable.
Ɣ
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
Ɣ
Also read the manual of the equipment being connected.
Terminals
5
6
4
2
1
3
7
1
SD Card slot
2
USB 1 - 3 port
3
HDMI1 - 3 (p. 8, 9)
4
DIGITAL AUDIO OUT
5
AV (COMPONENT / VIDEO)
(p. 9)
6
Aerial terminal
(see below)
7
ETHERNET (p. 8)
Basic connections
Mains lead and aerial
Ŷ
Digital TV, Analogue TV
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
Aerial
RF cable
Ŷ
Mains lead
Insert the mains plug firmly into place.
Ɣ
When disconnecting the mains lead, be absolutely sure to
disconnect the mains plug at the socket outlet first.
Ɣ
Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup.
Ɣ
Do not place the RF cable under the TV.
Ɣ
An aerial, correct cable (75
:
coaxial) and correct terminating plug are required to obtain optimum quality picture and
sound.
Ɣ
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
Ɣ
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
Ɣ
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.
TH_L47_55WT60H_EN TEMP.indd 7
TH_L47_55WT60H_EN TEMP.indd 7
3/25/2013 9:30:35 AM
3/25/2013 9:30:35 AM
