12
Connecting the Display Unit and the Tuner Box
Please ensure that the display unit and the tuner box are disconnected from the mains sockets before attaching or
disconnecting any leads.
Wired connection
If you are going to place the tuner box close to the display unit, it is recommended to connect them using supplied HDMI cable.
B
A
Rear of the Display Unit
Rear of the Tuner Box
AC 220 - 240 V
50 / 60 Hz
Mains
lead
Tuner Box
HDMI cable
3.0 m
Wireless connection
You can place the tuner box and the display unit in a flexible way using the wireless unit (not using any cables
between the display unit and the tuner box).
If you choose to use the wireless connection between the display
unit and the tuner box, ensure that the wireless transmitter and the wireless receiver are positioned to face
each other without any obstructions.
The wireless unit uses 60 (59.40 - 61.56) GHz frequency band. Do not use the wireless unit near the equipment
using the same frequency band to avoid the interference.
It may take a while to change the input mode when using the wireless unit. To resolve this, use supplied HDMI
cable to connect the display unit and the tuner box.
Picture and sound may be interrupted or the TV may not be operated properly depending on the setting place
of the wireless transmitter or obstacles (furniture, AV equipment, rack, rack door, etc.) between the wireless
transmitter and the wireless receiver. To resolve this, change the installation layout without any obstacles between
the wireless transmitter and the wireless receiver.
●
●
●
Transmission range of the Wireless Unit
: Available area to place the wireless transmitter
40°
5°
Wireless
Transmitter
Wireless
Transmitter
View from the side
View from the top
10 m
10 m
5 m
5 m
80°
80°
Wireless
Receiver
Display Unit
Tuner Box
Tuner Box
Wireless
Receiver
45°
45°
5 m
5 m
Adjust the angle of the
wireless transmitter to face
the wireless receiver.
●
Display
Unit
Caution
Do not place the wireless unit in the following locations to avoid poor signal condition or TV failures.
Location subject to be high temperature (near the heater, etc.)
Location with poor air circulation (at the end of a closed rack, etc.)
Keep the wireless unit away from the devices such as wireless LAN, microwaves, mobile phones or other
electric equipment to avoid radio wave interference. Otherwise malfunction or slow response may occur.
●
•
•
●
Note
The range may be shortened depending on the obstacles, the surrounding environment or building structure.
Ensure the wireless transmitter is facing the wireless receiver.
●
●
If the display unit is connected to external equipment other than the supplied tuner box by using HDMI cable, the
following icon will be displayed on the screen.
Some functions may not be available depending on the connected equipment.
●
●
Basic Connection
