Accessories
Quick Start
Guide
9
Assembling the pedestal
Remove the cable cover from the frame
.
The cable cover will be used again after the
pedestal is attached to the display unit.
●
B
Cable cover
Use the assembly screws
to fasten securely.
Make sure that the screws are securely tightened.
Be careful not to scratch the surface (part with gloss finish) of the base during assembly.
●
●
A
A
B
B
C
Hole for the
base installation
Securing the Display Unit
Slide the pedestal frame posts into the brackets on
the rear of the display unit.
Use the assembly screws
to fasten securely.
Make sure that the screws are securely tightened.
●
E
Attach the holder cover
with assembly screws
.
Make sure that the screws are securely tightened.
●
D
F
Attach the cable cover.
Cable cover
Place a cable in
the groove as
necessary and
attach the cable
cover.
The lower part
of the groove is
separated in right
and left. Use the
one suitable for
you.
●
