28
4. Remove the Speaker (Squawker/L, Squawker/R).
7.35. Remove the Front bracket
1. Remove the Bottom support metal. (See section 7.33.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (GS02, GS09 and GH11).
4. Disconnect the connector (A51). (See section 7.4.)
5. Remove the screws (
×
3 ,
×
2
) and remove the
Front bracket.
7.36. Remove the G-Board, GS-
Board and GH-Board
1. Remove the Front bracket. (See section 7.35.)
2. Remove the screws (
×
5 ).
3. Remove the screws (
×
4 ).
4. Remove the Front shield case front and the Front shield
top.
5. Remove the GH-Board.
6. Remove the screws (
×
2
) and remove the GS-Board.
7. Remove the screws (
×
3 ).
8. Disconnect the connector (G51) and remove the G-
Board.
7.37. Remove the K-Board and
S-Board
1. Remove the Cabinet assy. (See section 7.25.)
2. Remove the Speaker (Squawker /L). (See section 7.34.)
3. Remove the screws (
×
5
) and remove the Bottom
shield L.
4. Disconnect the connector (S1).
5. Remove the screws (
×
2
) and remove the S-Board
unit.
6. Remove the screw (
×
1
) and remove the S-Board.
Summary of Contents for Viera TH-65PY800P
