27
7.29. Remove the C3-Board
1. Remove the Fan unit (L). (See section 7.20.)
2. Remove the Cabinet-fixing metal (A) and (B). (See sec-
tion 7.21. and 7.26.)
3. Remove the flexible cables holder fastening screws (
×
10
).
4. Disconnect the flexible cables (CA11, CA12, CA13, CA14
and CA15).
5. Disconnect the flexible cable (C33).
6. Disconnect the connector (C32).
7. Remove the screws (
×
5
) and remove the C3-Board.
7.30. Remove the Cabinet-fixing
metal (B) (Lower)
1. Remove the Cabinet assy (glass). (See section 7.25.)
2. Remove the screws (
×
4
).
3. Remove the Cabinet-fixing metal (B).
7.31. Remove the C4-Board
1. Remove the Cabinet-fixing metal (B). (See section 7.30.)
2. Remove the Vertical Bar (L). (See section 7.18.)
3. Remove the flexible cables holder fastening screws (
×
10
).
4. Disconnect the flexible cables (CB11, CB12, CB13, CB14
and CB15).
5. Disconnect the flexible cable (C41).
6. Disconnect the connector (C45).
7. Remove the screws (
×
5
) and remove the C4-Board.
7.32. Remove the C5-Board
1. Remove the Tuner unit. (See section 7.4.)
2. Remove the Cabinet-fixing metal (B). (See section 7.30.)
3. Remove the flexible cables holder fastening screws (
×
10
).
4. Disconnect the flexible cables (CB6, CB7, CB8, CB9 and
CB10).
5. Disconnect the flexible cables (C50, C51, C52 and C53).
6. Remove the screws (
×
5
) and remove the C5-Board.
7.33. Remove the C6-Board
1. Remove the Cabinet-fixing metal (B). (See section 7.30.)
2. Remove the Vertical Bar (R). (See section 7.18.)
3. Remove the flexible cables holder fastening screws (
×
10
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and
CB5).
5. Disconnect the flexible cables (C60 and C61).
6. Remove the screws (
×
5
) and remove the C6-Board.
7.34. Remove the Speaker
(Squawker)
1. Remove the screws (
×
4
) and remove the Bottom sup-
port metal.
2. Disconnect the relay connectors.
3. Remove the screws (
×
2
each).
Summary of Contents for Viera TH-65PY800P
