6. Remove the spacers and spacer rings (×6
).
6.24. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
2. Attach the C1-Board and the C2-Board, connect the flexible
cables (×16) from the Plasma panel to the C1-Board and
the C2-Board, and fit the flexible cable holders.
3. Attach the Hooks (left, right) and fit the stand brackets (L,
R) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the cabinet assy and each P.C.Board and so on, to
the new plasma panel.
*When fitting the
cabinet assy
, be careful
not
to allow any
debris, dust or handling residue to remain between the
front glass and plasma panel.
16
TH-42PV700AZ / TH-42PV700H / TH-42PV700M / TH-42PV700MR / TH-42PV700MT
Summary of Contents for Viera TH-42PV700AZ
Page 5: ...1 Applicable signals 5 TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT ...
Page 24: ...9 4 No Picture 24 TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT ...
Page 36: ...36 TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT ...
Page 60: ...TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT 60 ...
