2. Disconnect the connector (S1).
3. Remove the screws (×2
) and remove the S-Board.
6.22. Remove the K-Board
1. Remove the S-Board. (See section 6.21.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (DG1). (See section 6.7.)
4. Remove the screws (×2
) and slide to the right to remove
the K-Board.
5. Disconnect the connectors (K1) and remove the K-Board.
6.23. Remove the Plasma panel
section from the Cabinet assy
(glass)
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×3
each).
3. Replace the servicing stand and stand the set.
4. Remove the cabinet assy and the plasma panel fastening
screws (×7
).
5. For leaving the plasma panel from the cabinet assy, pull the
bottom of the front frame forward, lift, and remove.
15
TH-42PV700AZ / TH-42PV700H / TH-42PV700M / TH-42PV700MR / TH-42PV700MT
Summary of Contents for Viera TH-42PV700AZ
Page 5: ...1 Applicable signals 5 TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT ...
Page 24: ...9 4 No Picture 24 TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT ...
Page 36: ...36 TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT ...
Page 60: ...TH 42PV700AZ TH 42PV700H TH 42PV700M TH 42PV700MR TH 42PV700MT 60 ...
