Panasonic VDR-D105 Operating Instructions Manual Download Page 34

Page: 34 / 108

LSQT1040

Adjusting LCD monitor/viewfinder

Adjusting LCD monitor/viewfinder

Adjust the brightness and color level.

1 Press the MENU button, then select [

SETUP]

[

LCD SET] or [

EVF SET]

[YES] and press the

joystick.

2 Move the joystick up or down to select the item to be

adjusted. Then, move the joystick left or right to
make the adjustment.

The bar display moves.

[

LCD SET]

Brightness of the LCD monitor

Color level of the LCD monitor

[

EVF SET]

: Brightness of the viewfinder

≥

In order to adjust the brightness of the viewfinder,
close the LCD monitor, and the viewfinder will be
activated.

≥

When the LCD monitor is rotated by 180° towards
the lens, the brightness of the LCD monitor cannot
be adjusted.

≥

These settings will not affect the images actually
recorded.

Adjust the focus by sliding the eyepiece corrector
knob.

≥

You can adjust the brightness of the viewfinder from the menu.
(

above)

EVF

Adjusting the field of view

3:30 PM
12.15.2006

D105(P)eng.book 34 ページ２００６年１月１６日　月曜日　午後４時１分

Summary of Contents for VDR-D105













































































































Search results

Summary of Contents for VDR-D105

Reviews:

Related manuals for VDR-D105

Brands by name

Popular brands

Panasonic VDR-D105, Operating Instructions Manual

Search results

Summary of Contents for VDR-D105

Reviews:

Related manuals for VDR-D105

Brands by name

Popular brands