Panasonic VDR-D105 Operating Instructions Manual Download Page 25

Page: 25 / 108

LSQT1040

Inserting/removing a disc

Inserting/removing a disc

When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the
unit. The cover of the disc compartment will not open unless the unit is powered.

1 Slide the DISC EJECT lever once and

release it.

A few moments after the ACCESS/PC lamp blinks,
the cover of the disc compartment will open slightly.

2 Open the cover of the disc compartment by hand and insert/remove

the disc.

∫

Inserting disc

Fit the disc onto the spindle in the center.

Recording/playback side

Pickup lens

∫

Removing disc

While pressing down on the spindle, grasp the edge of the disc and gently lift it out.

3 Push the section marked “PUSH CLOSE” on the cover of the disc

compartment to close the cover.

Click!

D105(P)eng.book 25 ページ２００６年１月１６日　月曜日　午後４時１分

Summary of Contents for VDR-D105













































































































Search results

Summary of Contents for VDR-D105

Reviews:

Related manuals for VDR-D105

Brands by name

Popular brands

Panasonic VDR-D105, Operating Instructions Manual

Search results

Summary of Contents for VDR-D105

Reviews:

Related manuals for VDR-D105

Brands by name

Popular brands