VariCam LT Ready for Live White Paper
15
5.4.2. Steps for Manually Adding a User Account
[ To set an account on the ROP]
Connect the PC and ROP on the network, open the ROP setup software and open the User Auth tab.
Clicking the REFRESH button here will display the old username.
Fill in the New Username, Old Password, New Password and Retype New Password fields with the desired data and
click SET to complete the setting process.
The default factory account settings for new devices are “username: admin, password: 12345.”
[
Adding an account to the VariCam LT
]
Access MENU→PERIPHERAL→NETWORK FUNC→USER ACCOUNT to add the account.
Access MENU→PERIPHERAL→NETWORK FUNC→ACCOUNT LIST to see a list of the currently added accounts.
The default settings for new devices are made in one of the following configurations.
Username: guest/Password: p2guest
Username: admin/Password: 12345
(The “admin” account was added in Version 6.0 and later.
Users originally using versions prior to Version 6.0 may use the “Initialize” command to initialize the device and
add the new account.)
