Panasonic VARICAM LT, White Paper

Page: 12 / 22

VariCam LT Ready for Live White Paper
12
The following is the configuration information for which Return is valid. 720p and SD signals are not supported.
RETUERN VIDEO SDI INPUT FORMAT
SYSTEM FORMAT
1080/23.98 1080/24.00 1080/25.00 1080/29.97 1080/50.00 1080/59.94
True P PsF True P PsF True P PsF True P PsF P I P I
23.98P
V V - - - - - - - - - -
24.00P
- - V V - - - - - - - -
25.00P
- - - - V V - - V V - -
29.97P
- - - - - - V V - - V V
50.00P
- - - - V V - - V V - -
59.94P
- - - - - - V V - - V V
50.00I
- - - - V V - - V V - -
59.94I
- - - - - - V V - - V V
4.4. Fan Settings
The fan mode can be changed in MENU→SYSTEM SETTINGS→FAN→FAN SPEED.
A new “Live Mode” has been added as of VariCam LT Version 6.0. In Live Mode, the fan is normally operated
at a low speed. However, when a preset temperature is reached, the fan speed is optimized for the [MAIN CODEC]
settings (the same speeds as when MATCH CODEC settings are made).
This setting can also be changed from ROP MENU→SYSTEM CAM. (AK-HRP1000GJ/1005GJ only)
4.3. Genlock/Return Video Settings
When using the Return function, Genlock must either be externally synchronized (using VariCam as a slave device)
or the Return signal itself must be locked to the VariCam LT (using VariCam as a master device).
[Genlock Settings]
(When used as a slave device): MENU → SYSTEM SETTINGS → GENLOCK → GENLOCK MODE: EXT
(When used as a master device): MENU → SYSTEM SETTINGS → GENLOCK → GENLOCK MODE: INT
The Return function can be assigned to the following switches.
From MENU→SYSTEM SETTINGS→USER SWITCHES, assign the function to the switch of your choice:
-USER1
-USER2
-USER3
-USER GRIP1
-USER GRIP2
-LENS RET SW