manualshive.com logo in svg

Panasonic VARICAM LT, White Paper

Share
Download
Panasonic VARICAM LT White Paper Download Page 13

VariCam LT Ready for Live White Paper

13

5. VariCam LT and ROP Connection Settings

5.1. Steps to Connect a VariCam LT with an ROP

5.2. VariCam LT Network Settings

VariCam LT network settings

ROP settings

User authentication settings

The following are the steps for connecting a VariCam LT with an ROP.

These can only be set from the VariCam LT (see 5.2).

These can be set in ROP or Easy IP setup software or I 
n ROP setup software (see 5.3).

These settings are not required when using the devices under the  
default settings. However, there are notes for those who have  
used VariCam LT before Version 6.0 
(see 5.4).

1. From MENU→PERIPHERAL→LAN PROPERTY, set each of the following items as needed. 
DHCP: DHCP auto-configuration setting 
IP ADDRESS: IP address 
SUBNET MASK: Subnet mask 
DEFAULT GATEWAY: Default gateway 
PRIMARY DNS: The primary DNS server to use 
SECONDARY DNS: The secondary DNS server to use 
DHCP SERVER: DHCP server configuration setting 

2. From MENU→PERIPHERAL→NETWORK SEL, select LAN

5.3. ROP Settings

1. From ROP MENU→ROP IP SETTING, set each of the following items as needed. 
     ROP IP ADDRESS: IP address 
     ROP SUBNET MASK: Subnet mask 
     ROP DEFAULT GATEWAY: Default gateway 

2. From ROP MENU→CAMERA IP SETTING, set the IP address for the camera number you wish to connect to the  
     above IP address set on the VariCam LT and set PORT to “49152.”  

3. From ROP MENU→CONNECT SETTING, set the “CONNECT MODE” for the camera number set in step 1  
     above to “LAN (AU).” 

*For step 1 above, the parameter can also be set using Easy IP setup software.  
  In addition, the parameters in steps 2 and 3 can also be set using ROP setup software.

Here, we present only the basic method for connecting the VariCam LT with an ROP.  
For more detail, refer to the operating guide for your VariCam LT and your ROP. 
Please note in advance that the use of the AK-HRP200G requires a PC for connection settings.

5.3.1 When using the AK-HRP1000GJ/1005GJ

Summary of Contents for VARICAM LT























Reviews:

No comments

Brands by name

Popular brands

Load more brands