17
Useful Information
Dispose of Computer
<For Europe and U.S.A./Canada>
Attention Customers
Don't remove the battery by yourself. The battery must be removed by qualified professionals.
When disposing of this product, be sure to contact qualified professionals to remove the battery.
Attention Qualified professionals to remove the battery
Dispose of this product correctly in accordance with the local regulations after removing the battery as shown in the
following procedure.
n
Preparation
l
Remove all peripherals (SD memory card, etc.).
l
Erase the stored data. (
è
Reference Manual
“Erasing Flash Memory Data”)
CAUTION
l
Never disassemble the computer except before disposal.
l
Refer to “Safety Precautions and Regulatory Information” for precautions when disposing of the computer.
1. Turn off the computer completely. (
è
page 14)
l
Do not use sleep/hibernation.
2. While connecting the AC adaptor, press both volume buttons (
and
) at the same time for more than
ten seconds.
The built-in battery’s power output stops.
l
Disconnect the AC adaptor, and press the power button for 1 second or longer and confirm the computer does
not start up.
3. Turn over the computer, and peel off the seal (A) on the side of Interface
cover with a thin pointed tool.
4. Remove the screws (3), and lift up Interface cover to remove.
5. Remove the silver screw.
A
UT-MA6_USEN.indb 17
24/02/2014 16:28:10
