- 31 -
Reference
Audio
Cannot switch audio.
The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream” or “On”*. Set
“Digital Audio Output” to “PCM” or “Off”*.
* For “DSD Output Mode”
Cannot hear the desired audio.
Check the connections and the “Digital Audio
Output” settings. (
UB450
UB159
To output audio from a device
connected with an HDMI cable, set “HDMI
Audio Output” to “On” in the Setup menu.
UB450
UB159
When connecting this unit
to a TV via an HDMI VIDEO OUT and to an
amplifier/receiver via an HDMI AUDIO OUT,
set “HDMI(VIDEO) Output Mode” to “Automatic
( Video Only / Video+Audio )”. (
)
There is no sound coming out.
UB450
UB159
To output audio using
COAXIAL terminal, set “COAXIAL Down
Sampling” properly.
Refer to “Connecting to an amplifier/receiver”
(
11 -
) to check the audio output
settings suited to the connections of your
device.
UB450
UB159
In the following cases, audio is
not output from the terminals listed below:
y
HDMI VIDEO OUT terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and “HDMI(VIDEO)
Output Mode” is set to “Automatic ( Video
Only / Video+Audio )”
– When “HDMI Audio Output” in “Digital Audio
Output” is set to “Off”
y
HDMI AUDIO OUT terminal
– When “HDMI Audio Output” in “Digital Audio
Output” is set to “Off”
Playback
Disc cannot be played.
The disc is dirty. (
Depending on the Ultra HD Blu-ray disc, it may
not be possible to perform playback unless this
unit is connected to the Internet.
Still pictures (JPEG) do not play back
normally.
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
Confirm that this unit is connected to the
Confirm the “BD-Live Internet Access” settings.
Confirm a USB device is connected to the USB
Network
I can’t connect to the network.
Confirm the network connection and settings.
(
)
Check the operating instructions for each
device and connect accordingly.
Summary of Contents for UltraHD DP-UB150
Page 37: ...37 Reference...
