Panasonic UF-6300, Service Manual

Page: 209 / 274

209
51 REMOTE
DIAGNOSTIC
1 INVALID Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
2 VALID
52 DIAG.
PASSWORD
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PSWD
(----) Setting a 20-digit password for secured sub-address
communication.
54 FAX FORWARD 1 INVALID Selecting whether the machine performs Fax Forwarding
to the specified destination.
2 VALID
56 COVER SHEET 1 OFF Setting the home position of the Cover Sheet parameter
in the Select Mode.
2 ON
58 LANGUAGE 1 A-ENGLISH Selecting the language to be shown on the display and
reports.
2 C-FRENCH
3 SPANISH
63 PC-FAX RCV
MODE
1 PRINT Selecting how the machine will execute the received Fax
document(s). If the setting is set to either “Upload” or
“Upload & Print” the machine cannot enter the Sleep
Mode. Mode.
PRINT : Print the received document(s).
UPLD&PRT: Print the received document(s) and upload
it’s file.
UPLOAD : Upload the received document file.
2 UPLD&PRT
3 UPLOAD
65 PRINT
COLLATION
1 INVALID Selecting whether the machine prints out documents in
sequence.
2 VALID
82 QUICK MEMORY
XMT
1 INVALID Selecting whether the machine performs Quick Memory
Transmission.
INVALID: Stores all documents into memory first before
dialing the telephone number.
VALID : Starts dialing the telephone number
immediately after storing the first page.
The Quick Memory Transmission feature (Fax Parameter
No. 82) is not available when the Job Build is set to
"2:ON".
*2 VALID
99 MEMORY SIZE
(Flash Memory)
- - Displays the memory size.
117 MULTI STATION 1 INVALID Set the default setting for the Multi Station function.
INVALID: The document is sent to a single destination
only.
VALID : Allows sending the document to multiple
destinations.
2 VALID
125 CONFIRM
STATIONS
1 INVALID Set whether to confirm the destinations.
When set to Valid the document cannot be sent unless
the destination is confirmed.
This function also operates when the addresses are
specified with Group Dialing or Program Dialing function.
If an address has been altered (added or removed) when
confirming addresses, the address confirmation message
will appears again when transmitting the documents
(pressing the start key).
2 VALID
No. Parameter
Setting
Number
Setting Comments