Panasonic UF-6300, Service Manual

Page: 206 / 274

206
7 Installation
Refer to the Operating Instructions (For Facsimile).
Fax Parameter Table (AU) for reference
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST 1 NORMAL Setting the home position of the CONTRAST key.
2 LIGHTER
3 DARKER
02 RESOLUTION 1 STANDARD Setting the home position for the RESOLUTION.
2 FINE
3 S-FINE
4 HALFTONE
(FINE)
5 HALFTONE
(S-FINE)
04 STAMP (HOME) 1 OFF Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2 ON
05 MEMORY
(HOME)
1 OFF Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
2 ON
06 DIALING
METHOD
1 PULSE Selecting the dialing method.
2 TONE
07 HEADER PRINT 1 INSIDE Selecting the printing position of the header.
INSIDE: Inside TX copy area.
OUTSIDE : Outside TX copy area.
NO PRINT : Header is not printed.
2 OUTSIDE
3 NO PRINT
08 HEADER
FORMAT
1 LOGO, ID
NO.
Selecting the header format.
2 FROM TO
09 RCV'D TIME
PRINT
1 INVALID Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page
number on the bottom of each received page.
2 VALID
10 KEY/BUZZER
VOLUME
1 OFF Selecting the volume of the Key/Buzzer tone.
2 SOFT
3 LOUD
12 COMM.
JOURNAL
1 OFF Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
OFF : Does not print
ALWAYS : Always prints
INC. ONLY: Prints only when communication has failed.
2 ALWAYS
3 INC. ONLY
13 AUTO JRNL
PRINT
1 INVALID Selecting whether the machine prints the journal
automatically after every 32 transactions.
2 VALID
17 RECEIVE MODE 1 TEL Setting the receive mode.
2 FAX
3 FAX/TEL
SW.
4 TAM/FAX