Panasonic UF-6300, Service Manual

Page: 208 / 274

208
34 ENERGY SAVER
MODE
1 OFF To reduce the power consumption in standby, select
either Energy-Saver or Sleep mode and specify the
Delay Time (1 to 120 minutes) for the machine to enter
into the selected mode.
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
OFF : The unit will remain in standby mode
and consume more energy than when
in Energy-Saver or Sleep modes.
ENERGY-SAVER: Saves energy by consuming less
power than when in standby mode by
turning off the fuser unit after the
specified time.
SLEEP : This is the lowest power state that the
machine enters after the specified
time without actually turning off.
2 ENERGY-
SAVER
3 SLEEP
35 DAYLIGHT TIME 1 OFF Set the Daylight Time according to your local regulation.
OFF : Daylight time is not applied.
MAR 2nd : From 2:00 AM on the 2nd Sunday in March to
2:00 AM on the 1st Sunday in November.
APR 1st : From 2:00 AM on the 1st Sunday in April to
2:00 AM on the Last Sunday in October.
2 MAR 2nd
3 APR 1st
36 RING PATTERN
(DRD)
1 INVALID Selecting whether or not the machine is available for
“DRD Service”. If this parameter is set to “VALID”, your
machine detects the specified ring pattern only when
receiving a document automatically.
2 VALID
37 RCV TO
MEMORY
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to ON, this parameter will not be shown
on the LCD display.
38 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine
fromunauthorized use.
39 PIN CODE
ACCESS
1 NONE Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 SUFFIX
3 PREFIX
42 CONF. FILE
SAVE
1 INVALID Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2 VALID
43 PASSWORD-
XMT
1 OFF Setting a 4-digit XMT-Password and selecting whether
the machine performs and checks the XMT-Password of
the receiving station when transmitting.
2 ON
44 PASSWORD-
RCV
1 OFF Setting a 4-digit RCV-Password and selecting whether
the machine performs and checks the RCV-Password of
the transmitting station when receiving.
2 ON
46 SELECT RCV 1 INVALID Selecting whether the machine performs
selectivereception.
2 VALID
47 REMOTE RCV 1 INVALID Selecting whether or not the machine accepts remote
reception command.
2 VALID
48 TELEPHONE
LINE
1 PSTN Selecting the type of line connected.
2 PBX
49 PSTN ACCESS
CODE
(----) Setting PSTN Access Code. (Up to 4 digits)
No. Parameter
Setting
Number
Setting Comments