21
English
2. Use the plasma display mounting hexagon
bolts
テ
(2 at the left and 2 at the right) to
securely fasten both the ground plates
ㅃ
and plasma display from the back of the
supports.
●
The ground plates
ㅃ
and plasma display mounting
hexagon bolts
テ
are provided as accessory parts
of the frame.
Grounding plates
ㅃ
4. Wiring the equipment to be connected
●
For details on how to install the equipment to be connected with the display or adding more equipment, refer to the
operating instructions of the plasma display and the operating instructions of the equipment concerned.
1. If the equipment to be connected (such as
an AV amplifier and DVD recorder) is to be
installed at the same time for use, connect
the plasma display wires first.
2. In connecting the wires of the antenna and
equipment to be connected, and lead them
out from underneath the metal frame.
Run the cords along the clamper of the
wiring metal piece under the back of the
metal frame, and lead them out from behind
the metal frame.
3. Run the power cord through either the left
or right light shield groove.
Display mounting hexagon
bolts (M8×130)
テ
Getting the hexagon bolts ready
(4 sets each of support mounting hexagon bolts
テ
)
Get the hexagon bolts ready by passing them through the spring washers
and flat washers in this order.
Caution
Do not bundle the connection cables and main lead
together.
Caution
Use a tightening torque of 7 Nm to 9 Nm for the hexagon
bolts.
Clamper
Metal frame for wiring
