Link F
unc
tions (
Q
-Link /
VIER
A Link)
83
Q-Link
Preparations
•
Connect the DVD Recorder / VCR with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”,
“Megalogic (a trademark of Grundig Corporation)” or “SMARTLINK (a trademark of Sony Corporation)”
•
Q-Link connection
(p. 81)
•
Use fully wired SCART cable.
•
Set up the DVD Recorder / VCR. Read the manual of the recorder.
•
Q-Link terminal setup in the Setup Menu
[AV1 out] (p. 34)
•
Download Analogue channel setting
“Analogue channel download” (see below)
Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue is still broadcast). Digital
channel settings are not downloaded.
•
To download the Analogue channel settings
[Q-Link Download] (p. 34) or [Auto Setup] in Analogue mode (p. 40) or
“Auto Setup” - when first using the TV (p. 12)
Direct TV Recording
- What you see is What you record
Recording the current programme on a DVD Recorder / VCR immediately.
EXIT
DIRECT TV REC
G
U
ID
E
DIRECT TV REC
•
Available conditions:
Picture source
Mode
Recording from
Analogue
TV
TV monitor out
AV
Recorder’s tuner
DVB
TV
TV monitor out
AV (watching recorder’s tuner)
AV
Recorder’s tuner
AV (watching recorder’s external input)
AV
Recorder’s external input
AV (watching TV’s external input)
AV
TV monitor out
•
When Direct TV Recording is performed, the recorder is automatically turned on if it is in
Standby mode.
•
Changing channel or turning off the TV is available while the recorder is recording from its
own tuner.
•
Changing channel is not available while the recorder is recording from the TV tuner.
■
To stop recording
Unlock the tuner
G
U
ID
E
Tuner Locked
Press EXIT to unlock and stop recording
EXIT
Power on link and Easy playback
When the DVD Recorder / VCR starts playback or the direct navigator / function menu for the equipment is activated, the TV
is turned on and the input mode is switched automatically so that you can view the content. (Only when the TV is in Standby
mode.)
Power off link
When the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the videocassette or disc is
not active.)
•
This function will work even if the TV enters Standby mode automatically by auto power standby function.
Note
•
Some recorders are not compatible. Read the manual of the recorder.