T
echnical Information
F
AQs, etc.
63
Updating the TV software
From time to time, a new version of software may become available for download to enhance the performance or
operations of the TV.
To download from a notification banner
A notification banner will appear when you search for a new version software by using the “System Update
Search Now” function (p. 42).
In DVB mode, a notification banner will appear when one of the BBC
channels is tuned if a new available software is found.
To start downloading press the OK button, this may take up to 60 minutes to complete.
To ignore the new software press the EXIT button.
You can update later automatically when the TV is in Standby mode
“To download any new software automatically” (see below)
If you do not wish to update, set “Auto Update Search in Standby” to “Off”, but the notification banner will keep
appearing during the period of new software availability, usually 2 to 3 days.
To download any new software automatically
Ensure that the “Auto Update Search in Standby” function in the System Update menu is set to “On” (p. 42).
The TV will then download new software automatically at night if it is left in standby without any timer
programming in progress.
Note
During software download and update, DO NOT switch off the TV.
SCART, S-VIDEO and HDMI terminal information
AV1
SCART terminal
(RGB, VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
AV2
SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS / VIDEO
switching.
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in
15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8
Status CVBS
6
Audio in (L)
4
Audio earth
2
Audio in (R)
Socket Earth
21
CVBS out (video) 19
CVBS earth
17
Red in, S.C. - in
15
Red earth
13
Green in
11
Green earth
9
Blue in
7
Blue earth
5
Audio out (L)
3
Audio out (R)
1
20 CVBS in (video)
18 RGB status earth
16 Status RGB
14 Earth
12 --
10 Q-Link data
8
Status CVBS
6
Audio in (L)
4
Audio earth
2
Audio in (R)
AV3
S-VIDEO 4 pin terminal
HDMI
terminal
Chrominance in
Luminance in
Chrominance earth
Luminance earth
Hot Plug Detect
19
DDC/CEC Ground 17
SCL
15
CEC
13
TMDS Clock Shield 11
TMDS Data0
9
TMDS Data0+
7
TMDS Data1 Shield 5
TMDS Data2
3
TMDS Data2+
1
18 +5V Power
16 SDA
14 Reserved
(in cable but N.C. on device)
12 TMDS Clock
10 TMDS Clock+
8
TMDS Data0 Shield
6
TMDS Data1
4
TMDS Data1+
2
TMDS Data2 Shield
Found new software version
.
Press OK to start update (may take 40 mins)
or Press EXIT to ignore
and you can update when TV is in standby.
