manualshive.com logo in svg

Panasonic TX-76PW150A, Operating Instructions Manual

Share
Download
Panasonic TX-76PW150A Operating Instructions Manual Download Page 36

Customer Information 
Warnings and Cautions 

 

36 

To keep your Panasonic Television in good working order please observe the following warnings and cautions. 
Please be careful with this television. Like all electrical equipment it can cause serious injury or damage if it is 
mistreated 

 

Danger

 

Do not

 insert foreign objects. (Keep 

metal or easily inflammable objects 
out of this television). 
 
 
 

Danger:

 

High Voltage

 

Do not

 remove the rear cover, as High 

Voltage components will be exposed. 
 
 
 

DO NOT

 touch the aerial cable and 

metal parts of the television when 
there is lightning around. 
During storms switch the television 
off. 

DO NOT

 leave in standby. 

Remove the plug from the wall socket. 
 

Do not

 place any containers of water 

or other liquids on or near this 
television. 

 
 
Do not 

place the TV in humid or 

dusty locations, or areas exposed to 
smoke or steam. 
Avoid exposing the television to direct 
sunlight or any other sources of direct 
heat. 
 
 

Do not 

stand or place heavy objects 

on top of the television. 
 

 
 
 
 

Remove the Power Plug from the wall 
socket when the Television is not 
going to be used for an extended 
period of time. 
 
 

In the advent of unusual operation 
(e.g. odd sounds, smoke or aromas), 
turn the television Off and remove the 
power cord from the wall socket. Then 
call the Television Service Centre: this 
may reduce the possibility of 
expensive repair costs.

 

 
Danger

 

Always pull the plug out of the wall 
outlet by holding the plug itself. 

Do not

 pull the plug by the power 

cord.  
 
 

Danger

 

Do not

 alter the power cord. 

Do not

 use if the power cord or plug 

is damaged or if the plug does not fit 
tightly into the socket. 
 
 

Do not

 allow the power cord to 

come into contact with flame or hot 
surfaces. 
 
 
 
 

Do not

 place heavy objects on the 

power cord. 

 

 
 
 
Adequate ventilation is essential. 
Allow a gap of at least 10cm around 
the TV, even in a cabinet or between 
shelves. 
 
 

Do not

 subject the TV to any 

physical shocks. Always remove any 
connector cables when moving the 
TV. When moving the TV from one 
place to another wrap it in 
something protective. 
 
 
Turn the power OFF before 
connecting other electrical 
equipment. 
 
 
 
 
Any external aerial should be 
installed by a reputable qualified 
installer and should comply with 
Australian Standard AS1417.1 or 
International Standard IEC597-1.1. 
 
 

 

 

Safety 

First

 

Summary of Contents for TX-76PW150A









































Reviews:

No comments

Brands by name

Popular brands

Load more brands